LED Tap Light provides an instant visual indication of water temperature. Temperature indicator levels (degrees centigrade): below 25 - green; between 26-35 - blue; between 36-45 - red; above 45 flashes red and blue.
The flow of water activates the LED Tap Light which changes colour according to the temperature of the water (no batteries required). Comes with two adaptors to fit most standard mixer taps (see dimensions below).
This environmentally friendly product has water conservation and filter systems in the adaptor. The LED Tap Light will function with as little as one bar water pressure which is only a quarter of the average household water pressure.
Encourages children to practice good hygiene and is also a great safety feature to prevent scalding. Made from durable ABS plastic with silver finish.
Dimensions: Tap/faucet light: diameter 28 x height 55 mm. Weight: 28 g. Dimensions: adaptor 1 - 20 mm diameter, adaptor 2 - 24 mm diameter. It is recommended to add a few turns of PTFE (plumber's teflon) tape for a professional seal.
LED Tap Light - Mixer Tap Temperature Sensor Adaptor - Silver - Hydro Powered LED Light Mixer Tap - Faucet Adaptor Temperature Sensor
Put some colour into your bathroom or kitchen with this hydro powered LED Tap Light which is designed to provide a visual indication of water temperature. The product creates a luminous glow which adds luxurious mood lighting and makes washing your hands a sheer pleasure. The colour water flow also encourages children to practice good hygiene and is a great safety feature. You will always know who washes their hands in your bathroom! The LED Tap Light has a water conservation and filter system in the connection. To activate, simply turn on your tap and the flow of water activates the light source. Turn off the water and the light goes off.
The sensor comes with two adaptors to fit a standard kitchen or bathroom sink. The LED Tap Light will fit: directly to a 22 mm (male) tap without the use of an adaptor; a 20 mm (female) tap with adaptor 1; a 24 mm (female) tap with adaptor 2. Installation is easy by removing the existing filter/aerator by hand or with pliers and simply screw on the sensor (with adaptor if required). It is recommended to add a few turns of PTFE (plumber's teflon) tape for a professional seal.
Once installed, the built-in automatic mini device generates it's own power when the water flows. The illuminated colour will be changed according to water temperature. If the water temperature is under 25, the LED light will emit green light. If the water temperature is between 26-35, the LED Tap Light will emit blue light. If the water temperature is between 36-45, the LED light will emit red light. If the water temperature is above 45, the LED light will flash with red and blue light, which warns you should be careful.
From Madrid Spain to DE, ES, FR, IT & UK
Please provide full address, email and contact phone number for delivery.
Shipping to other EU countries available on request.
Posted on November 23, 2016